Yojaro 4-Pack Silicone Suction Phone Mount, Hands-Free Stand
Xem đánh giá khách hàngVề sản phẩm này
- ✓ Chính hãng 100%
- ✓ Bảo hành 12 tháng 1 đổi 1*
- ✓ Đổi trả 30 ngày miễn phí*
› Xem thêm chi tiết sản phẩm
Thường được mua cùng nhau
Phụ kiện tương thích
Khám phá thêm cáp sạc và phụ kiện đồng bộ chính hãng.
Tìm phụ kiệnThiết bị bổ trợ
Kiểm tra thông số tương thích trước khi ghép bộ.
Xem cùng danh mụcTổng giá mua cùng: ₫127,000
Bạn cần tìm thông tin cụ thể?
Video giới thiệu sản phẩm
Ảnh xem trước · Video thực tế đang được cập nhật
Khám phá Yojaro 4-Pack Silicone Suction Phone Mount, Hands-Free Stand
Thông tin sản phẩm & thông số kỹ thuật
| Model | Suction Grip 4-Pack |
|---|---|
| Brand | Yojaro |
| Form Factor / Category | Miếng dán hít chân không silicone mặt lưng điện thoại |
| Key Features | Hút bám chắc chắn lên gương, kính, gạch men, tủ lạnh hỗ trợ quay video TikTok, livestream rảnh tay |
| Cable Length / Dimensions | 80 x 55 mm mỗi miếng (Combo 4 màu) |
| Material | Silicone đàn hồi cao cấp phủ 24 giác hút chân không siêu dính kèm keo dán 3M |
| Compatibility | Mặt lưng điện thoại và mọi loại ốp lưng phẳng |
| Warranty Policy | 6 tháng chính hãng |
Hướng dẫn lắp đặt & căn chỉnh an toàn trên xe
Lau sạch và để khô bề mặt taplo, kính chắn gió hoặc kiểm tra kết cấu lá cửa gió trước khi lắp. Cố định khóa cốc hút hoặc ngàm kẹp chắc chắn, điều chỉnh góc nhìn bản đồ thuận tiện mà không che khuất tầm quan sát khi lái xe.
Lưu ý bảo quản & duy trì độ bám ổn định
Tránh dán trực tiếp lên bề mặt da mềm, cong hoặc phủ sáp bóng. Với cốc hút геl tái sử dụng, có thể rửa nhẹ bằng nước sạch và để khô tự nhiên trước khi lắp lại.
Mô tả sản phẩm
Design & Build Quality
The Yojaro 4-Pack Silicone Suction Phone Case Mount is a phone-case accessory, not a wearable or audio device. Each mount measures approximately 3.15 x 2.17 inches and uses soft silicone with 24 independent suction cups to hold a phone on a smooth, flat surface.
The set includes black, white, translucent and light pink mounts. The slim design works with most iPhone and Android phones when attached to a flat case. The adhesive backing is intended for a regular phone case, not an expensive case or a surface that must remain undamaged.
How to attach and use it
- Clean and dry the phone case and the mounting surface.
- Remove the protective film, align the mount and press it onto the case.
- Apply even pressure across the mount so the suction cups make contact.
- Allow the adhesive to stabilize according to the product instructions before hanging the phone.
- Place it on glass, a mirror or another smooth, flat surface, then check the grip before releasing the phone.
Do not use it on textured walls, wood, fabric, rough surfaces or areas with dust or oil. Grip strength depends on surface cleanliness, flatness and smoothness.
Core Features & Technology
This product does not play audio and has no Bluetooth, microphone or noise-cancellation features. Its primary function is mechanical: keeping a phone hands-free for selfies, video recording, video calls and media viewing.
Real-world adhesion
The 24 independent suction cups increase contact points. Glass and mirrors generally provide the best results. Adhesion can weaken over time, when dust accumulates or when the phone remains mounted for too long. The manufacturer does not provide a verified maximum load rating, so this should not be treated as a safety-rated phone holder.
Real-World Setup & Usability
This is a mechanical accessory with no battery, charging requirement or wireless connection. It can provide a temporary phone stand for TikTok, selfies, video calls, workouts, kitchen use and bathroom use when placed on a suitable surface.
Removal and care
The mount attaches to the case with adhesive and is not designed for repeated removal and reapplication. If removal is necessary, peel slowly from an edge to reduce the risk of case damage. Clean dust from the suction cups with a clean, damp cloth and let them dry before use. Follow the product recommendation of approximately 30 minutes maximum per session and check the grip regularly.
Figure 1: Core specifications and product features for Yojaro 4-Pack Silicone Suction Phone Mount, Hands-Free Stand
Technical Specifications Table
| Specification | Details |
|---|---|
| Brand | Yojaro |
| Product name | 4-Pack Silicone Suction Phone Case Mount |
| ASIN | B0FN75GTQ7 |
| Quantity | 4 mounts |
| Colors | Black, white, translucent and light pink |
| Material | Silicone |
| Approximate size per mount | 3.15 x 2.17 inches |
| Suction cups | 24 independent cups per mount |
| Compatibility | Most iPhone, Android phones and flat phone cases |
| Suitable surfaces | Glass, mirrors and smooth, flat surfaces |
| Recommended use time | Approximately 30 minutes per session |
| Maximum load | No verified manufacturer data available |
Pros & Cons Analysis
Pros
- Four mounts in different colors for multiple cases or replacements.
- Supports hands-free selfies, video recording and video calls.
- Each mount has 24 independent suction cups.
- Requires no battery, charging or app.
- Works best on glass, mirrors and smooth, flat surfaces.
Cons
- Not suitable for textured, wooden or uneven surfaces.
- The adhesive backing is not designed for repeated removal and reuse.
- Grip consistency varies by surface and may weaken over time.
- No verified maximum load rating is provided.
- The phone may fall if the surface is dirty or the grip is not checked before use.
Frequently Asked Questions (FAQ)
Does it work with iPhone and Android phones?
Yes. It is compatible with most iPhone and Android phones when attached to a clean, dry and flat phone case.
Can I attach it directly to the phone?
Use it on a regular phone case. Avoid attaching it to an expensive case or device because the adhesive is not intended for repeated removal.
Can it be used on a wall?
Use it only on smooth, flat surfaces such as glass or mirrors. It is not suitable for textured walls, wood or uneven surfaces.
Can the mount be reused after removal?
Do not rely on repeated reuse of the adhesive. The suction cups can be cleaned, but performance depends on the remaining adhesive and surface condition.
Can it hold every phone?
The manufacturer does not provide a maximum load rating. Check the grip before releasing the phone and avoid mounting it where a fall could cause damage.
Đánh giá khách hàng
Khách hàng nhận xét
Nhận xét sẽ được tổng hợp khi có đánh giá từ khách hàng.
Hình ảnh & video từ khách hàng
Chưa có hình ảnh hoặc video do khách hàng gửi.
